A utomatic machines for the production of doughs and continuous rolls of 5/6 mm thick sheets, feed the moulding machines.
The sheet laminator unit consists of pairs of stainless steel rollers with special profiles fitted on four supports.
The outer side supports house the bearings, while the two inner polyethylene supports store the pasta and are 20 mm apart from the steel supports; this eradicates the possibility of dampness infiltrating into the bearings.
With a simple manoeuvre, the polyethylene containment supports can be distanced from the cylinders, in order to thoroughly clean all the parts coming in contact with the pasta.
Cleaning operations are made easier by removing the conveyor belt and the shaft with blades from the kneading tray.
The widely tested construction technology and safety devices make the machine practical and safe to use.
Detail of automatic sheeters
Click on the image to enlarge
Available Models
A 160
- 160 mm sheet width
- Approx. 70 kg hourly production
- Kneading tray capacity: 20 Kg;
- Increased kneading tray capacity: 40 kg.
A 250 - 265
- 250-265 mm sheet width
- Approx. 120 kg hourly production
- Kneading tray capacity: 65 Kg;
A 300 - 320
- 300-320 mm sheet width
- Approx. 150 kg hourly production
- Kneading tray capacity: 65 Kg;
A 500-540
- 500-540 mm sheet width
- Approx. 240 kg hourly production
- Kneading tray capacity: 65 Kg;
A 160 DV
- Dual tank
- 160 mm sheet width
- Approx. 150 kg hourly production
- Increased kneading tray capacity: 40 + 40 Kg
- Kneading tray capacity: 20 + 20 kg;
A 250-265 DV
- Dual tank
- 250-265 mm sheet width
- Approx. 240 kg hourly production
- Kneading tray capacity: 65 + 65 kg;
A 300-320 DV
- Dual tank
- 300-320 mm sheet width
- Approx. 300 kg hourly production
- Kneading tray capacity: 65 + 65 kg;
A 500-540 DV
- Dual tank
- 500-540 mm sheet width
- Approx. 480 kg hourly production
- Kneading tray capacity: 65 + 65 kg;
How much more do we give you?
Would you like more information about this product?
In order to receive more information about the product, fill in the form below, enter your email and click “Send Message”. A member of our staff will be in touch with you as soon as possible via email or telephone.
